Beschreibung
Prune branches with one hand
A compact one-hand chainsaw for pruning trees and shrubs and cutting up garden waste. Saws through branches up to 11 cm thick.
Why this tool
- Cutting depth up to 110 mm: for thick branches.
- Chain speed 4.7 m/s: at 3200 min⁻¹ for a fast, clean cut.
- Safety switch: the saw only starts after you press the lock-off.
- Telescopic pole available: with pole 7064494 you prune high branches from the ground.
What you can use it for
Pruning fruit trees, shrubs and thick hedge branches, and sawing garden waste into smaller pieces. For wood only, not for felling trees.
Which Nexxsaw suits you?
- V2.2: compact and light (1.5 kg), cuts branches up to 11 cm. For occasional pruning around the garden.
- V3: rotating saw head (0°–32°) and manual oil pump, cuts branches up to 12 cm. For frequent pruning and awkward angles.
- V3 Ultra (7064322): brushless, with a 7″ bar and a chain speed of 5.9 m/s, cuts branches up to 14 cm. For heavier pruning work.
All three fit telescopic pole 7064494 and run on any Maxxpack 18V battery.
Reach higher with the telescopic pole
Fit the Nexxsaw to telescopic pole 7064494 (1.15–1.75 m) with the battery at the bottom, and reach branches up to about 3 m high without a ladder.
Maintenance and spare parts
Lubricate the chain regularly with biodegradable chain oil. Check the chain tension: there should be a gap of about 3–4 mm between the underside of the bar and the chain. Replacement chain: 7063765FX. Replacement bar: 7063846.
Which version suits you?
- Tool only: for when you already own Maxxpack 18V batteries.
- Tool + 2.0Ah battery + 2.4A charger: for pruning around the garden.
- Tool + 4.0Ah battery + 4.5A fast charger: recommended for longer pruning jobs, with twice the runtime and charged in 60 minutes.
One battery for the whole Maxxpack range
Part of the Batavia Maxxpack 18V platform: one battery fits over 100 tools. Battery and charger are available separately or as a set.
